G&G Armament GC16 Warthog 12" GC AEG Airsoft Rifle with Adjustable Stock in Black (ETU + MOSFET)

G&G Armament GC16 Warthog 12" GC AEG Airsoft Rifle with Adjustable Stock in Black (ETU & MOSFET)

The G&G Armament GC16 Warthog 12" AEG Airsoft Rifle in Black is a serious step up for players looking to move beyond a basic polymer M4 without spending a small fortune on a custom build. Part of G&G's GC Intermediate series, this full metal airsoft rifle combines a distinctive billet-style receiver, a 12-inch CNC-machined KeyMod handguard and some genuinely useful electronic features. You've got G&G's Electronic Trigger Unit (ETU), an integrated MOSFET, programmable three-round burst functionality and a metal Version 2 gearbox running on 8mm ball bearings. Not a bad collection of features straight out of the box! With its aggressive AR-style appearance and adjustable stock, the GC16 Warthog offers a practical balance of solid construction, familiar handling and modern Airsoft AEG technology. It's particularly appealing for woodland skirmishes, outdoor games and anyone who appreciates an M4 assault rifle with a little more personality.

Starting with the receiver, the GC16 Warthog immediately stands out from G&G's more conventional Combat Machine models. Its full metal upper and lower receivers feature angular, billet-inspired styling that gives the rifle a purposeful appearance without looking unnecessarily complicated. The construction incorporates aluminium, steel, stainless steel and reinforced nylon-fibre components, depending on the individual part, providing strength where it's useful while keeping the furniture practical. At approximately 2764g, this electric airsoft rifle has a reassuringly substantial feel when shouldered. It's certainly not one of those featherweight polymer BB guns, but the weight remains manageable for regular outdoor skirmishing. The familiar M4 layout also means experienced AR-platform players should feel comfortable with the controls almost immediately. There's something rather satisfying about a metal-bodied airsoft gun that feels solid in your hands, particularly when you're moving between barricades or settling into a shooting position.

Moving forward, the Warthog features a 12-inch CNC-machined metal KeyMod handguard with a hard-anodised finish. This longer front end provides plenty of room for your supporting hand and gives the rifle its distinctive modern carbine profile. The KeyMod mounting slots allow compatible accessories to attach directly to the handguard, so you can fit a tactical torch, foregrip or other suitable equipment without covering every available surface in bulky rail sections. Running along the top is a continuous 20mm Picatinny rail, providing a convenient mounting platform for compatible optics. Fancy a compact red dot for fast target acquisition or a magnified sight for longer woodland engagements? There's plenty of space to arrange your setup. G&G also includes adjustable flip-up front and rear sights, giving you a practical aiming option straight from the box. At the muzzle, a 14mm counter-clockwise (CCW) thread allows compatible tracer units, mock suppressors and other suitable airsoft accessories to be fitted.

Working back towards the receiver, G&G has included several thoughtful details that make the GC16 Warthog particularly comfortable to handle. The ambidextrous magazine release is a welcome addition for left-handed players, while the ambidextrous mock charging handle allows the hop-up access mechanism to be operated from either side. The fire selector features a textured surface and positive detent, providing a definite click when changing between firing positions. It's a small detail, but anyone who's tried operating slippery controls while wearing gloves will understand why it matters. Underneath the receiver sits an ergonomic motor grip, while the rear features G&G's six-position GOS V3 adjustable stock. This allows you to alter the rifle's length to suit your reach, clothing and preferred shooting stance. The rear sling plate adapter also provides an attachment point for a compatible one-point sling, which is handy when you need to free up your hands between games. Altogether, the Warthog feels like an airsoft rifle designed with actual skirmishing in mind rather than simply looking good on a display stand.

Inside the receiver sits a metal Version 2 gearbox supported by 8mm ball bearings, giving the GC16 Warthog a familiar mechanical foundation. The Version 2 gearbox is widely used across M4-style Airsoft AEG rifles, making it a practical platform for routine maintenance and potential compatible upgrades. Driving the gearbox is a 25,000 RPM high-torque long-axis motor, providing the rotational power required to operate the internal gear and piston assembly. Combined with the electronic trigger system, this gives the Warthog a capable internal arrangement for regular skirmishing. The real talking point, however, is G&G's factory-fitted Electronic Trigger Unit. Rather than relying entirely on conventional mechanical trigger contacts, the ETU uses an electronic microswitch arrangement to register trigger activation. This provides a responsive feel during semi-automatic shooting, particularly when taking repeated single shots. Ever had an opponent appear briefly between two pieces of cover? A responsive trigger makes those split-second opportunities much more comfortable to deal with. Just remember that the microswitch only needs a light, controlled press; forcing the trigger beyond its activation point can damage the mechanism.

Working alongside the ETU is an integrated MOSFET, which manages electrical switching and helps reduce wear associated with traditional mechanical trigger contacts. It's a worthwhile feature to have fitted from the factory, particularly for players who don't fancy opening their gearbox immediately after buying a new airsoft gun. Another clever addition is the programmable three-round burst function. The rifle supports safe, semi-automatic and fully automatic operation, with the option to change the automatic setting to fire controlled three-round bursts instead. On this G&G electronic system, programming involves holding the trigger for approximately ten seconds in the appropriate setting, following the manufacturer's instructions. It's a handy option when you prefer short bursts rather than continuous automatic fire, although your skirmish site's firing restrictions always take priority. The Warthog also uses a rear-wired electrical arrangement with a Mini Tamiya connector, and G&G recommends a compatible 11.1V LiPo battery rated at 25C or below. Always make sure your chosen battery fits the available compartment, meets the manufacturer's recommendations and is charged using a suitable LiPo balance charger.

Inside the outer barrel, the GC16 Warthog uses a 330mm inner barrel with a 6.08mm bore, paired with an adjustable hop-up system for standard 6mm airsoft BBs. The hop-up applies backspin to the BB as it travels through the barrel, helping it maintain a flatter flight path when correctly adjusted. Getting the setting right for your chosen ammunition is particularly worthwhile during woodland games, where engagement distances can vary considerably. Too much hop-up and your shots may climb; too little and they'll drop earlier than expected. A few minutes spent adjusting the system can make a noticeable difference to consistency. The rifle is supplied with a 300-round high-capacity M4-style magazine, providing a generous ammunition supply for longer games. Like most high-cap magazines, it uses a winding mechanism that requires occasional attention to maintain feeding. The Warthog also accepts suitable G&G and other compatible M4/M16 AEG magazines, giving you flexibility when putting together your loadout. Players who prefer quieter movement can explore compatible mid-cap magazines, while those who favour ammunition capacity may appreciate the supplied high-cap arrangement.

So, who is the G&G GC16 Warthog 12" really for? It's a great option for players upgrading from an entry-level polymer electric rifle who want stronger metal externals, better-equipped electronics and a familiar M4 platform. The 12-inch handguard, adjustable GOS V3 stock and approximately 870mm overall length make it particularly comfortable for woodland skirmishes, outdoor assault games and larger urban environments. Players spending most of their time in extremely tight indoor CQB arenas may prefer a shorter rifle, but for mixed outdoor use, the Warthog's proportions make plenty of sense. The combination of a billet-style receiver, 8mm bearing gearbox, high-torque motor, ETU and MOSFET gives this G&G airsoft rifle a well-rounded specification without relying on unnecessary gimmicks. And let's be fair, those angular receiver lines look pretty smart too. Before heading onto the field, check the rifle's actual muzzle energy with a chronograph, follow your site's firing restrictions and always wear suitable airsoft-rated eye protection. With sensible maintenance and proper battery care, the GC16 Warthog offers a capable platform for regular skirmishing and future personalisation.

Highlights

• G&G Armament GC16 Warthog 12" electric airsoft rifle from the GC Intermediate series
• Full metal billet-style upper and lower receiver with distinctive angular AR styling
• Durable construction incorporating aluminium, steel, stainless steel and reinforced nylon-fibre components
• 12-inch CNC-machined metal KeyMod handguard with hard-anodised finish
• Continuous 20mm Picatinny top rail for compatible optics and accessories
• 14mm CCW muzzle threading for compatible tracer units and mock suppressors
• Adjustable flip-up front and rear sights included
• Ambidextrous magazine release for convenient left- or right-handed operation
• Ambidextrous mock charging handle for practical hop-up access
• Textured fire selector with positive detent for confident operation
• Ergonomic motor grip for comfortable handling
• Six-position adjustable GOS V3 stock for personalised length adjustment
• Rear one-point sling plate adapter for compatible sling attachment
• G&G Electronic Trigger Unit (ETU) for responsive semi-automatic shooting
• Integrated MOSFET for improved electrical switching and reduced conventional trigger contact wear
• Programmable full-automatic and three-round burst firing options
• Metal Version 2 gearbox supported by 8mm ball bearings
• 25,000 RPM high-torque long-axis motor
• 330mm inner barrel with 6.08mm bore diameter
• Adjustable hop-up system for tuning BB flight and consistency
• Rear-wired battery system with Mini Tamiya connector
• Compatible with suitable 11.1V LiPo batteries rated at 25C or below
• Supplied with a 300-round high-capacity M4-style magazine
• Compatible with suitable G&G and other M4/M16 AEG magazines
• Non-blowback electric operation
• Great choice for woodland skirmishes, outdoor games and players upgrading from basic polymer AEG rifles

What's Included

• G&G Armament GC16 Warthog 12" GC AEG Airsoft Rifle in Black
• 300-Round High-Capacity Magazine
• User Manual

Technical Specifications

• Manufacturer: G&G Armament
• Model: GC16 Warthog 12"
• Product Code: EGC-WAR-012-BNB-NCM
• EAN: 4712972929086
• Series: GC Intermediate
• Colour: Black
• Gun Type: Electric Airsoft Rifle / Airsoft AEG
• Platform: AR / M4 Assault Rifle
• Power Source: Electric / Rechargeable Battery
• Overall Length: Approximately 870mm
• Weight: Approximately 2764g
• Receiver Construction: Full Metal Billet-Style
• Construction Materials: Aluminium, Steel, Stainless Steel and Reinforced Nylon Fibre
• Handguard Length: 12 Inches
• Handguard Construction: CNC-Machined Metal KeyMod
• Handguard Finish: Hard Anodised
• Top Rail: 20mm Picatinny
• Outer Barrel Thread: 14mm Counter-Clockwise (CCW)
• Front Sight: Adjustable Flip-Up
• Rear Sight: Adjustable Flip-Up
• Magazine Release: Ambidextrous
• Mock Charging Handle: Ambidextrous
• Fire Selector: Textured with Positive Detent
• Stock: Six-Position Adjustable GOS V3
• Sling Mount: Rear One-Point Sling Plate Adapter
• Calibre: 6mm Airsoft BB
• Inner Barrel Length: 330mm (Primary Specification)
• Inner Barrel Bore: 6.08mm
• Gearbox: Metal Version 2
• Gearbox Bearings: 8mm Ball Bearings
• Motor: 25,000 RPM High-Torque Long-Axis Motor
• Trigger System: G&G Electronic Trigger Unit (ETU)
• MOSFET: Yes, Integrated
• Fire Modes: Safe / Semi-Automatic / Full-Automatic
• Additional Fire Mode: Programmable 3-Round Burst
• Hop-Up: Adjustable
• Magazine Capacity: 300 Rounds
• Magazine Type: High-Capacity M4 AEG Magazine
• Compatible Magazine Reference: G-08-083
• Battery Recommendation: 11.1V LiPo, 25C or Below
• Battery Connector: Mini Tamiya
• Battery Wiring: Rear Wired
• Battery Included: No
• Blowback: No
• Approximate FPS: 301-350 FPS (Supplier Range; Actual Output May Vary)